Laser Beauty Machine Supplier - Beauty Equipment ManufactureWhat should be paid attention to when using water oxygen meter in beauty salon
1. The instrument should be placed stably in a clean operating room or treatment room with room temperature and humidity not greater than 80%. When the humidity in the air is too high, there will be water vapor inside the instrument, which will affect the efficiency of the internal system, and even damage the parts of the machine in severe cases. Please ensure that the air humidity in which the machine is running is not too high.
2. Before use, be sure to check whether the power supply device meets the specifications and load requirements of the machine according to the technical parameters of the machine itself
3. The treatment hand pen of this machine is a high-tech precision equipment with precision components inside. The environment for installation and use should be clean and low-dust, otherwise the dust will block the inside of the hand pen and cause irreversible damage or even damage. Be careful not to drop when placing and using!
4. Please choose an appropriate location so that the air can freely flow through the ventilation holes of the machine to prevent the machine from overheating. The machine should not be placed near heat sources such as radiators, heat ventilation ducts, etc., or where there is direct sunlight, high humidity, or where mechanical vibration occurs.
Precautions for operation of water oxygen meter1. The switch of the oxygen tank can only be turned on after the oxygen pipe is connected to prevent the danger of a large amount of oxygen leakage. And pay attention to fire prevention, smoking is strictly prohibited. Turn off the oxygen tank switch in time after use.
2. The gas in the nutrient solution bottle cannot be filled too much to avoid danger. When air bubbles emerge from the bottle, it is considered that the gas has been filled.
3. When mixing nutrients, only one cosmetic factor can be added to the base liquid, and multiple types cannot be mixed.
4. During the operation, wear protective goggles for the client and plug the ears with earplugs, and pay attention to the operation technique when doing nasal and perioral treatment to avoid the client feeling uncomfortable.
5. The operator needs to disinfect his hands before operation, and it is forbidden to use other liquids for treatment, so as not to block the hole of the treatment pen.
6. When choosing between oxygen and self-made gas, pay attention to the correct adjustment of the gas source switching valve.
7. Check the treatment pen before operation, and open the cap of the pen during operation. And check whether the delivery pipeline of oxygen and liquid is unobstructed.
8. Do not point the operating pen at the eyeball to avoidadverse reactions.
9. Adjust the pressure from 0.2Mpa to 0.5Mpa to ensure a smooth transition of air pressure.
Beauty Equipment Co., Ltd. is a professional beauty equipment manufacturer integrating R&D, production, sales and service. It has successfully developed and produced ultrasonic beauty equipment, laser beauty equipment, beauty and slimming equipment, water light beauty equipment and various high-end beauty and body equipment, which are widely used in plastic surgery and beauty and body institutions.
.jpg)
