Laser Beauty Machine Supplier - Beauty Equipment ManufactureThree major features of water light beauty instrument, operation precautions
Three characteristics of radio frequency water light beauty instrument
1. High security
At present, the very good radio wave skincare equipment pays attention to the gradual (no wound, no recovery period) method. After the operation, there will be no wound on the face, and the safety is very high.
2. Quick results
The skin becomes firmer after one radiofrequency session, while eventually giving the skin a radiant finish over the next few months.
3. Long-lasting effect
One-time care through radio frequency technology can achieve the effect of lifting and tightening
Suitable for thin or sensitive skin and forehead
The water light beauty instrument is non-surgical, non-injection, non-invasive, zero pain, no scab, no need to apply anesthesia, and no allergies during the operation. Although it is non-invasive, it does not mean that it has no moisturizing effect at all. The micro-frequency radio frequency needle-free water light adopts the technology of transdermal shallow guide and deep guide, fixed point, positioning, fixed layer, and quantitative injection of various nutrients deep in the dermis to inject and penetrate into the dermis for non-invasive transdermal hydration to achieve deep hydration , Remove dry lines, strengthen cells, whiten and rejuvenate the skin and other effects are by no means hype.
Precautions for instrument operation
1. When operating, pay attention that the microcrystalline head must fit the face, do not press too tightly, so as not to cause scratches due to inconsistent steps when sliding;
2. The instrument adopts high-energy focused radio frequency, and the radio frequency energy must be adjusted from a low level during operation. When operating, it must be fully compliant, otherwise there will be a burning sensation;
3. Before operation, the operator must check whether the RF energy of the microcrystal head is automatically output, adjust the energy to level 1-2, press start (on) and wait for the timeEnter the countdown. At this time, there is no need to press the black start switch on the handle. Use the sterilized finger to lightly touch the microcrystal head to feel whether there is energy;
4. The black switch button can be activated only after the probe has been fitted to the face;
5. The face of the guests cannot be disinfected with alcohol and wiped with hydrogen peroxide, in order to avoid some customers being allergic to such disinfection products, and the needle needs to be disinfected by soaking in 75% alcohol for 5 minutes;
6. The normal operation time is 15-20 minutes for half of the face, and 30-40 minutes for the whole face. If the skin is thin or sensitive, the operation time should be reduced as appropriate;
7. It is normal for the skin to feel reddened and tingling during and after the operation.
.jpg)
